
Plans and files for radio control airplanes ..
Built from Depron, Hobby King Foam, $ Tree Foamboard or MPF .. and also 3D Printed Files

Hi fellow modellers, and welcome to Lockey's RC Airplane Plans ... Eagle RC Models
Most of my models are designed to be made from 6mm Depron sheet foam but can be modified for
MPF (Model Plane Foam) Paper covered foam board and other forms of 5 to 6 mm sheet foam
Included with every set of printable PDF plans you get ...
Links to RC Groups forums with step by step build logs, build information, photos and proof of flight videos
and now .. 3D printed airplanes
Before you print any of my 3D Printed models .. or even before you buy one of my 3D printed models, please download the free ”Information Pack” and “Cura Settings” for my settings and preferences for printing LW-PLA in spiral mode and run a few tests to configure your printer .. Information Pack
PLEASE NOTE: ALL MY 3D PRINTED MODELS ARE DESIGNED TO BE PRINTED USING CURA SLICER
If you decide to slice the models yourself, it is SO important that you stick as close as possible to my recommendations and Cura profiles otherwise your prints are going to fail
It is important that you download the “Information Pack” and do a few test prints before you start (preferably before you purchase)
The fuselage and wings are designed to be printed from active foaming LW-PLA
“ColorFab LW-PLA” or “e-Sun PLA-LW”, either will work
The fuselage formers and other parts are designed to be printed from PLA+
My 3D printed "Quick Build" models are single wall double skin design with infill between the 2 walls
These models are very quick and easy to build once the parts are printed and can be printed on any 3D printer with a print volume size of 220 x 220 x 220 or larger.
The filament I use (and recommend) for these models is LW-PLA (active foaming Light Weight PLA)
E-sun PLA-LW, ColorFabb LW-PLA or PolyLight 1.0 all print about the same and can be used
I supply STL and G-code files with all 3D printed designs and most printers (not Bambu Lab printers) will accept my G-codes, but if your printer does not accept my G-codes then it will be necessary for you to slice the STL files yourself .. I ONLY use Cura slicer for my designs, but I have no doubt other slicers can be used to slice the STL files
Please download a Test File free of charge and do a test print before you purchase one of my "Quick Build" models
F4-D Skyray .. Quick Build .. now ready to download
Hand launch or retractable undercarriage .. choose which version you want to build
New "Quick Build" design, which is a double wall with infill, very strong and durable and although they take a bit longer to print, they are very quick to assemble
![]() | ![]() | ![]() |
---|---|---|
![]() | ![]() |
Click here for more information
Baby Draco 800mm wing span 3D Printed
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed most printers with minimum bed size 220 x 220 and Z axis of 220mm
Wingspan: 840 mm .. Length: 550 mm .. Wing area: 155 sq in. .. Wing loading: approx. 13.1 oz/sq ft









NOW AVAILABLE
"ELVIRA" 3D Printed Progressive Trainer .. Switch from
"High Wing" to "Low Wing" to "V Tail" to "Staggerwing Bipe"
My "Hook Lock" system allows the parts to be switched quickly and easily.
2 different wings for different flying styles ..
A straight wing for easy flying and the other is a semi-elliptical wing for sportier flying
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed most printers with minimum bed size 220 x 220
check out the build here: RCForum






NOW AVAILABLE
3D Printed Draco Bush Plane .. 1460mm Wing Span 1000mm long
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed most printers with minimum bed size 220 x 220
Check out the build here: Forum
NOW AVAILABLE
3D Printed Draco Bush Plane 2m wing span version
This one will have more scale detail but will need a bigger printer .. 300x300 bed












BD-5 Hybrid Pusher Prop .. 1350 Wing Span
With NEW click together fuselage .. STL and G-Code files
G-Codes are for any machine with a minimum print size of .. 220 x 220 x 210
and Prusa i3 MK3 with a print size of 250 x 210 x 210
Coming Soon
3D Printed F22 Raptor .. 900mm Wing Span 1300mm long
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed on a Prusa i3 MK3 or similar .. min size 250 x 210 x 210






De Havilland Vampire T55
NOW AVAILABLE
1200mm Wing Span
Designed to be printed in LW-PLA and uses my new click together fuselage
G-Codes are for Prusa i3 MK3 with a print size of 250 x 210 x 210
and should work with any machine with a minimum print size of .. 220 x 220 x 210
Flight video ... https://www.youtube.com/watch?v=BFaC2eYUyaM
Coming Soon .. 1500 Wing Span with Retracts





