This is the 3rd of my "Quick Build" series of warplanes .. to follow soon are .. P-51 Mustang and T-28 Trojan
Designed to be printed in LW-PLA with a few parts printed in PLA or PLA+
These models can be built with or without retractable landing gear ..
Build without landing gear to be hand launched or add retracts and fly from the ground
Specs:
4 channel .. Throttle, Ailerons, Elevator, Rudder
1100 mm wing span
880 mm Long
Estimated weight 900 - 1200 grams (depending on configuration used)
3s or 4s 2200 Battery
40 Amp ESC
D3548 900KV to 1400KV
Deflections:
CG 60mm
Aileron Low Rates 10mm 30 .. High Rates 15mm 40 Expo
Elevator Low Rates 10mm 35 Expo .. High Rates 15mm 50 Expo
Rudder 20 mm No expo
C of G .. 60mm from leading edge
 
Build log and information can be found here:
https://www.rcgroups.com/forums/showthread.php?4685219-Mig-3-%28Quick-Build-Series%29/page2&perpage=30
 
Flight Videos:
Maiden Flight:
https://www.youtube.com/watch?v=WR2OQRZNT0g
 
Other flights:
https://www.youtube.com/watch?v=mjhBEFMrypw
https://www.youtube.com/watch?v=uy6tcPt2M5Y&t=7s
 
3D printing settings
Supplied with STL files and G-code files which should work on many different printers with a size of 220 x 220 x 200 build size
Designed to be printed in LW-PLA (active foaming) with a few parts printed in PLA or PLA