Messerschmitt Bf-109
Designed to be printed in LW-PLA with a few parts printed in PLA or PLA+
These models can be built with or without retractable landing gear ..
Build without landing gear to be hand launched or add retracts and fly from the ground
Specs:
4 channel .. Throttle, Ailerons, Elevator, Rudder
1000 mm wing span
880 mm Long
Estimated weight 800 - 1000 grams (depending on configuration used)
3s or 4s 2200 Battery
40 Amp ESC
D3548 900KV to 1400KV
Deflections:
CG 60mm
Aileron Low Rates 10mm 30 .. High Rates 15mm 40 Expo
Elevator Low Rates 10mm 35 Expo .. High Rates 15mm 50 Expo
Rudder 20 mm No expo
C of G .. 60mm from leading edge
 
Flight Videos:
Maiden Flight:
https://www.youtube.com/watch?v=RO530x0LzeY
Second flight from Dolly:
https://www.youtube.com/watch?v=DqvdVXZxNLg&t=2s
 
Build log and information can be found here:
https://www.rcgroups.com/forums/showthread.php?4672581-Messerschmitt-Bf-109&perpage=30#post53542089
 
Supplied with STL files and G-code files which should work on many different printers with a size of 220 x 220 x 200 build size
Designed to be printed in LW-PLA (active foaming) with a few parts printed in PLA or PLA+