top of page
IMG_20191022_091321.jpg

Hi fellow modellers, and welcome to Lockey's RC Airplane Plans ... Eagle RC Models

Most of my models are designed to be made from 6mm Depron sheet foam but can be modified for

MPF (Model Plane Foam) Paper covered foam board and other forms of 5 to 6 mm sheet foam 

 Included with every set of printable PDF plans you get ...

Links to RC Groups forums with step by step build logs, build information, photos and proof of flight videos

and now .. 3D printed airplanes

Before you print any of my 3D Printed models .. or even before you buy one of my 3D printed models, please download the free ”Information Pack” and “Cura Settings” for my settings and preferences for printing LW-PLA in spiral mode and run a few tests to configure your printer .. Information Pack
PLEASE NOTE: ALL MY 3D PRINTED MODELS ARE DESIGNED TO BE PRINTED USING CURA SILCER

NOW AVAILABLE
"ELVIRA" 3D Printed Progressive Trainer .. Switch from
"High Wing" to "Low Wing" to "V Tail" to "Staggerwing Bipe"
My "Hook Lock" system allows the parts to be switched quickly and easily.
2 different wings for different flying styles ..
A straight wing for easy flying and the other is a semi-elliptical wing for sportier flying 
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed most printers with minimum bed size 220 x 220
check out the build here: RCForum
NOW AVAILABLE
3D Printed Draco Bush Plane .. 1460mm Wing Span 1000mm long
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed most printers with minimum bed size 220 x 220
Check out the build here: Forum
NOW AVAILABLE
  
3D Printed Draco Bush Plane 2m wing span version 
This one will have more scale detail but will need a bigger printer .. 300x300 bed 
BD-5 Hybrid Pusher Prop .. 1350 Wing Span
With NEW click together fuselage .. STL and G-Code files
G-Codes are for any machine with a minimum print size of .. 220 x 220 x 210 
and Prusa i3 MK3 with a print size of 250 x 210 x 210
Coming Soon
3D Printed F22 Raptor .. 900mm Wing Span 1300mm long
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed on a Prusa i3 MK3 or similar .. min size 250 x 210 x 210 
De Havilland Vampire T55 
NOW AVAILABLE
1200mm Wing Span
Designed to be printed in LW-PLA and uses my new click together fuselage
G-Codes are for Prusa i3 MK3 with a print size of 250 x 210 x 210
and should work with any machine with a minimum print size of .. 220 x 220 x 210 
Flight video ... https://www.youtube.com/watch?v=BFaC2eYUyaM
Coming Soon .. 1500 Wing Span with Retracts
Polaris Swept Wing 3DP
Coming Soon
1000mm Wing Span 1100 mm Long
G-Codes are for Prusa i3 MK3 with a print size of 250 x 210 x 210
and should work with any machine with a minimum print size of .. 220 x 220 x 210 
Flight video ... https://www.youtube.com/watch?v=yvGEOuIxdh4
Polaris 3DP
780mm Wing Span 1100 mm Long
G-Codes are for Prusa i3 MK3 with a print size of 250 x 210 x 210
and should work with any machine with a minimum print size of .. 220 x 220 x 210 
FULL SET OF G-Code and STL FILES NOW AVAILABLE
Case for Lemon LM0034 with Diversity Antenna 
Designed to be printed in PLA ... Free
Coming Soon .. Work in progress
3D Printed Taube (The Dove)
Now with NEW click together fuselage .. STL and G-Code files will be available
See "The Dove" flying ... https://www.youtube.com/watch?v=hcD0oLp1BBQ
Work in Progress 
Beechcraft Staggerwing Hybrid .. 1300 mm Wing Span
3D Printed fuselage with Depron / Model Plane Foam wings and tail assembly 
My latest builds

Viking EDF Swept Wing 

 

1100 mm wing span 

The fuselage is designed to take a 70mm EDF but I am sure a good 64mm EDF would power it OK

Viking in either Delta or Swept wing configuration

 

Delta is 850mm wing span and the swept wing version is 990mm wing span

The fuselage is designed to take up to a 8" prop so lots of different motor options 

As of now, Delta has been tested and flown but Swept wing version hasn't

"Venom-x" is what I have decided to call "my version" of the E-flight Commander ...

A friend of mine has the Commander and it flies so well, I decided to do a "similar" scratch build of the model

Wing span: 1350mm
Length: 1100mm
Weight (without battery) 1300grams
AUW with 2200/3s battery 1500 grams

 

If there is any interest in this I will add the plans and G-code files to my web site

1 / 1

Please reload

bottom of page