Plans and files for radio control airplanes ..
Built from Depron, Hobby King Foam, $ Tree Foamboard or MPF .. and also 3D Printed Files
Hi fellow modellers, and welcome to Lockey's RC Airplane Plans ... Eagle RC Models
Most of my models are designed to be made from 6mm Depron sheet foam but can be modified for
MPF (Model Plane Foam) Paper covered foam board and other forms of 5 to 6 mm sheet foam
Included with every set of printable PDF plans you get ...
Links to RC Groups forums with step by step build logs, build information, photos and proof of flight videos
and now .. 3D printed airplanes
Before you print any of my 3D Printed models .. or even before you buy one of my 3D printed models, please download the free ”Information Pack” and “Cura Settings” for my settings and preferences for printing LW-PLA in spiral mode and run a few tests to configure your printer .. Information Pack
PLEASE NOTE: ALL MY 3D PRINTED MODELS ARE DESIGNED TO BE PRINTED USING CURA SILCER
If you decide to slice the models yourself, it is SO important that you stick as close as possible to my recommendations and Cura profiles otherwise your prints are going to fail
It is important that you download the “Information Pack” and do a few test prints before you start (preferably before you purchase)
The fuselage and wings are designed to be printed from active foaming LW-PLA
“ColorFab LW-PLA” or “e-Sun PLA-LW”, either will work
The fuselage formers and other parts are designed to be printed from PLA+
Coming Soon .. "Quick Build" Warbirds
The models will all be around 1metre wing span and the same motors
and gear can be used in all the different planes
Spitfire .. Messerschmitt Bf-109 .. P-51 Mustang and the Mig 3
These are my new "Quick Build" design, which is a double wall with infill, very strong and durable and although they take a bit longer to print, they are very quick to assemble
 |  |  |
|---|---|---|
 |  |  |
 |  |  |
 |  |
Baby Draco 800mm wing span 3D Printed
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed most printers with minimum bed size 220 x 220 and Z axis of 220mm
Wingspan: 840 mm .. Length: 550 mm .. Wing area: 155 sq in. .. Wing loading: approx. 13.1 oz/sq ft
NOW AVAILABLE
"ELVIRA" 3D Printed Progressive Trainer .. Switch from
"High Wing" to "Low Wing" to "V Tail" to "Staggerwing Bipe"
My "Hook Lock" system allows the parts to be switched quickly and easily.
2 different wings for different flying styles ..
A straight wing for easy flying and the other is a semi-elliptical wing for sportier flying
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed most printers with minimum bed size 220 x 220
check out the build here: RCForum
NOW AVAILABLE
3D Printed Draco Bush Plane .. 1460mm Wing Span 1000mm long
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed most printers with minimum bed size 220 x 220
Check out the build here: Forum
NOW AVAILABLE
3D Printed Draco Bush Plane 2m wing span version
This one will have more scale detail but will need a bigger printer .. 300x300 bed
BD-5 Hybrid Pusher Prop .. 1350 Wing Span
With NEW click together fuselage .. STL and G-Code files
G-Codes are for any machine with a minimum print size of .. 220 x 220 x 210
and Prusa i3 MK3 with a print size of 250 x 210 x 210
Coming Soon
3D Printed F22 Raptor .. 900mm Wing Span 1300mm long
Designed to be printed in LW-PLA .. supplied with printable G-codes and/or STL files
Designed to be printed on a Prusa i3 MK3 or similar .. min size 250 x 210 x 210
De Havilland Vampire T55
NOW AVAILABLE
1200mm Wing Span
Designed to be printed in LW-PLA and uses my new click together fuselage
G-Codes are for Prusa i3 MK3 with a print size of 250 x 210 x 210
and should work with any machine with a minimum print size of .. 220 x 220 x 210
Flight video ... https://www.youtube.com/watch?v=BFaC2eYUyaM
Coming Soon .. 1500 Wing Span with Retracts
Polaris Swept Wing 3DP
Coming Soon
1000mm Wing Span 1100 mm Long
G-Codes are for Prusa i3 MK3 with a print size of 250 x 210 x 210
and should work with any machine with a minimum print size of .. 220 x 220 x 210
Flight video ... https://www.youtube.com/watch?v=yvGEOuIxdh4
Polaris 3DP
780mm Wing Span 1100 mm Long
G-Codes are for Prusa i3 MK3 with a print size of 250 x 210 x 210
and should work with any machine with a minimum print size of .. 220 x 220 x 210
FULL SET OF G-Code and STL FILES NOW AVAILABLE
 |  |  |
|---|---|---|
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |